channel steel
英 [ˈtʃænl stiːl]
美 [ˈtʃænl stiːl]
网络 槽钢; 槽钢出口; 槽形钢; 槽型钢
双语例句
- Last October the first batch of low-alloy channel steel was successfully rolled.
去年10月，成功地轧出了第一批低合金槽钢。 - Semicontinuous wide strip mill Effects of web thickness and width of a channel section steel on its bending behavior
半连续式宽带钢轧机带材厚度及其腹板宽度对简单断面型钢成型的影响 - The traction mechanism is composed of a connection support frame and a channel steel frame;
牵引机构由连接支架和槽钢架组成； - Experimental Study and Theoretical Analysis on the Bending Behavior of the Corroded Channel Steel
锈蚀槽钢受弯性能试验研究与理论分析 - Non-Linear Behaviour and Load-Carrying Capacity of CFRP-Strengthened Lipped Channel Steel Columns
碳纤维增强卷边槽形钢柱的非线性性能和承载力 - The long box assembly comprises a long box body, channel steel, a lifter, a cam mechanism, a pull and push plate, a supporting rod, etc.
长箱总成包括长箱体、槽钢、升降机、凸轮机构、推拉板及支棒等。 - Main material for installing: all kinds of channel steel, angle iron and plate iron.
始极槽，种板槽，始板槽（六）安装主要材料：各种型号的槽钢、角铁及铁板。 - The levelness and straightness of the foundation channel steel should accord with the design and specifications.
基础槽钢的水平度、平直度应满足设计和规范要求。 - Cause Analysis of Defects of Channel Steel for C-type Fork Tractor Gate Frame and Its Countermeasures
C型热轧叉车门架槽钢轧制缺陷的成因及改进 - The rack uses the channel steel to take the main body, the middle with stiffener board welded together.
机架采用槽钢作为主梁，中间加加强筋板焊接而成。 - During the installation, the positioning can be realized via inserting two edges of the channel steel into the positioning slots of the counterweight brick.
安装时将槽钢的两个边插入配重砖的定位缝里完成定位。 - The cover and oil channel limit steel of the transformer shall be in proper height to assure tight rubber sealing and keep it from leakage.
所有密封面必需平整吻合。变压器大盖与油槽限位铁高度适当，保证橡皮密封压紧，不漏渗油。 - Research on Parameterized Computer Aided Pass Design for Channel Steel
参数化槽钢孔型计算机辅助设计技术研究 - The cover and channel steel should earthed reliably.
盘柜外壳和基础槽钢应可靠的接地。 - His paper presents a simulation of displacement and stress field in channel steel roll forming process using elastic plastic finite element method with consideration of material and geometrical nonlinearly.
应用弹塑性有限元方法，同时考虑材料和几何双重非线性，研究槽钢辊弯成型的位移场和速度场。 - A brief discussion on pass design of swallow-tail channel steel
略谈燕尾槽型钢的孔型设计 - Butterfly design and application for channel steel
槽钢蝶式孔型设计及其应用 - Analysis of pass design of channel steel by continuous rolling
槽钢连轧孔型设计浅析 - According to the practical need and plastic theories, a new method was put forward to realize channel steel forming using rolling-bending forming technology and curvature online measuring and controlling.
根据现场需要，在调研的基础上，依据塑性变形理论，提出了利用滚弯加工使槽钢成型，并通过数控实现曲率在线测量和控制的新方法。 - Non-equilateral Channel Steel Cold Rolling Technique and Roller Design
不等边槽钢冷轧技术与轧辊设计 - In this paper the structure and principle of the blanking die for oblique wedge channel steel are introduced and the design methods of the main parts such as the punch, double orient oblique wedge unloading group parts are given.
本文主要介绍了斜楔式槽钢冲孔模的结构与工作原理，凸模、双向斜楔、退料组件等主要零部件的设计方法。 - When applied on rolling light channel steel the superiority in technique is more obvious.
该项技术应用于轻型槽钢的轧制时，技术上的优越性更加充分地显露出来。 - Pass improvement and trial production of 10# channel steel on Φ 300 mm rolling mill
10~槽钢在Φ300mm轧机上的试制和孔型优化 - Reason Analysis and Method Improvement on for the Damage to the Channel Steel Type of Braking Beam
槽钢式制动梁损坏原因分析及改进方法 - Channel steel is adopted to operating platform, simplifying the type of structure and convenient installing/ removing as well.
辅助平台和操作平台采用型钢方案，简化了结构形式且安拆方便。 - The opposed prestressed anchors, channel steel and the voided reinforced earth retaining wall have been used to form a new composite retaining structure, thus being able to be effective to control and prevent the distress of vertical high fill embankment.
采用对穿式预应力锚杆、槽钢和钢筋混凝土空心挡墙，组成一种新型复合式支挡结构，能够有效地治理竖直高填土路堤病害。 - The cold-formed of thin-wall channel steel columns which have large width to thickness ratio, trend to local buckling under the compression state, reducing the overall stability of components.
冷弯薄壁槽钢柱的板件宽厚比较大，在受压状态下容易发生局部屈曲而降低构件的整体稳定性。 - Secondly, it develops the computational and analytic program of the sawing power for rail steel and channel steel with Visual, Basic language, it will offer correctly reference for us when we choose power of saw blade motor.
其次，用VISUALBASIC语言开发了钢轨和槽钢的锯切功率计算分析程序，为正确地选择锯片电机功率提供了参考。